2X series rotary vane vacuum pump
2X series rotary vane vacuum pump

2X series rotary vane vacuum pump

This type of pump is a two-stage oil-sealed mechanical variable volume vacuum pump, which has the characteristics of direct exhaust to the atmosphere

Classification:

Rotary vane vacuum pump

Telephone:

021-32513915

Messages

2X series rotary vane vacuum pump

Detailed introduction

Product overview

This type of pump is a two-stage oil-sealed mechanical variable volume vacuum pump, which has the characteristics of direct exhaust to the atmosphere, and is suitable for electronics, refrigeration, electric light source, chemical, medical, bottle gall, packaging, dehydration, drying and other industries. (However, it cannot be used to extract gases containing excessive oxygen, explosive, corrosive to metals, chemically reacting to vacuum oil and containing particles and dust, and cannot be used as transfer pumps and compression pumps). The motor power is 0.37~5.5KW, the pumping speed is 2~70L/s, and the ultimate vacuum degree is 6×10-1Pa.

 

Product features

The ultimate vacuum degree is high, and the pumping capacity is large when running at high vacuum

It can be used alone as pumping, or as a booster pump, diffusion pump, molecular pump, etc. as a backing pump, maintenance pump, pre-pumping pump

 

Product use

Widely used in aviation, solar photovoltaic, environmental protection equipment, machinery manufacturing, food packaging and papermaking, defoaming, printing, drying, ceramics, blistering, electronics, petroleum, pharmaceutical medical equipment, chemical industry, metallurgy, printing and dyeing, woodworking machinery, suction cup processing, battery epoxy resin, textile and other industries, can also be used in scientific research institutions, colleges and universities research and teaching;

 

Performance parameters

Model
Pumping rate (L/s)
Ultimate pressure
Matching power(kW)
Air intake inner diameter(mm)
Exhaust port noise (dB)
Total weight(kg)
Overall dimensions (L×W×H) (cm)
Pa
2X-70A
70
6×10-2
5.5
80
≤86
333
91×66×70
2X-30A
30
 6×10-2
3
65
≤80
230
81×48×57
2X-15A
15
 6×10-2
2.2
40
≤78
202
79×53×54
2X-8A
8
 6×10-2
1.1
40
≤76
158
79×43×54
2X-4A
4
 6×10-2
0.55
25
≤75
66
56×34×40
2X-2A
2
 6×10-2
0.37
25
≤75
    

Related Products

YLS2S series permanent magnet frequency conversion central vacuum system

YLS2S series permanent magnet frequency conversion central vacuum system adopts double-stage compression host, reasonable distribution of compression ratio, optimization of bearing design, reduction of single-stage compression ratio, reduction of bearing load, and improvement of host life.

YLZJ roots vacuum pump

YLZJ series roots vacuum pump is the use of two figure-8 rotors installed perpendicular to each other on a pair of parallel shafts, by a pair of gears with a transmission ratio of 1:1 for reverse synchronous rotation

YL. LG(B) screw vacuum pump

YL. LG (B) series (variable-pitch) screw vacuum pump is our company according to the market demand independent research and development of advanced dry vacuum pump, because screw vacuum pump does not need oil lubrication or water seal

YLSK-F series water ring vacuum pump

YLSK-F series is a new generation of energy-saving liquid ring pump products independently developed and designed by Shanghai Yulong on the basis of years of scientific research achievements and production experience, widely absorbing advanced technology at home and abroad.

2BV series water ring vacuum pump

The 2BV vacuum pump and motor form a single unit with a small size and compact structure, which can be installed in a horizontal plane without the need for a chassis.

YLZJB vacuum pump

YLZJ(B) type rotary lobe vacuum pump with relief valve is a rotary variable displacement vacuum pump, which uses a pair of figure-8 rotors in the pump housing for constant velocity reverse rotation to produce suction and exhaust effect.

Messages

Submit